top of page

_sauced skins SSS112




    Save 10% on our no subscription, Forever Sounds plan with code FORVER10 https://subsocials.com/forever


    _sauced skins gets you one of the dirtiest, most dry drum kits for Ableton. A curated mixture of sampled vintage drums featuring 70 one shots that are ready for the heavy.


    This is a relatively simple kit with dead simple macro sound controls. The kit pieces were sampled with hard hitting, side chain destroying beats in mind. If subtlety is what you’re after, then perhaps this kit isn’t for you. A mixture of our favourite vintage kicks, snares, toms and older, darker cymbals, were lovingly recorded with a selection of ribbon mics and tube condensers through vintage outboard preamps, equalisers and compressors. We chose our thickest, chunkiest pieces and fed them loads of analog food to fatten them up even more.


    The Ableton drum rack is ready to play with levels for each kit piece and 4 different effects that will thicken up the kit in every direction. Hate the sauce? Make your own kit with the 70 samples provided.


    You gotta get the sauce. Drip, drip.


    • Minimum requirement for the drum rack is Ableton Suite 11.3+

    • 70 one-shot dry stereo drum samples. (140MB)

    • 1 Ableton Suite 11.3+ Drum Rack. (.ADG) (Velocity layered with macro level controls)

    • 32 Drum Kit Macro Variation Sound Presets

    • 96k/24bit .wav sources.

    • 100% Royalty-Free.

    • Designed in Vancouver, Canada by Subsocial Studios.


    Connect with us:

    _una conga SSS107





      _una conga is one creatively sampled conga made into a highly expressive instrument for Ableton 12 Suite. With over 328 samples, 67 conga articulations, and 32 MIDI loops, you’ll be the conguero conqueror in no time. 


      Cuba in a computer? Not really, but it is a conga. There are already too many sampled congas out there, so we’ve taken a different approach with this release. We sampled the usual ways that a conga is hit with fingers, palms, and mallets, but we also captured a whole library of unusual, but highly useful articulations to make this the tastiest tumbadora ever.


      We set out to capture a “quinto” sized conga tuned to an E, with some subtle warmth, sheen and extra detail. We captured it through our most open sounding microphone preamplifier, our favourite ribbon mic, and then some API EQ and light vintage LA-2A compression to get our ‘perfect’ sound. We pushed the limits of normal expression with just a single “lead” conga by recording so many different types of hits, with up to 3 velocity layers, and 6 random round robins for each velocity, 


      After listening to the thousands of hits captured, we narrowed our selection down to 328 samples. Next we tweaked the playing feel we wanted for each key to make things sound right. We needed a sampler instrument that was easy to play, and as real feeling in the dynamics as it was in the succession of hits. Luckily, the new “round robin” feature in Ableton 12’s updated sampler instrument allowed us to realize the conga for Ableton we wanted to make (which is why this release is an Ableton 12 Suite only release). We ended up with 4 Ableton 12 sampler instruments running in parallel to facilitate the expression of the conga. With the drag strokes, you’re able to control the length of your drag and release by holding down the note/hit for a longer period of time. 


      Use the 10 macro conga controls to tune it, soften it , shorten it, drive it, room it, spread it, bend it, and filter it as you see fit.  We’ve included 32 sound presets with these controls to get you started, but you can crate your own, or automate them in your productions for even more expression. If that’s still not enough, feel free to use or abuse the 32 MIDI loops and a demo song session we included to get things started.


      Some of the included articulations:


      • Finger & fingers taps, mutes + drags (centre, edge, rim & shell).

      • Palm hits, mutes + drags (centre, edge, rim & shell).

      • Mallet (felt & wool) hits + drags) (centre, edge, rim & shell).

      • Finger nail strokes.

      • Pencil taps + drags (centre, edge, rim & shell).

      • Pliers taps + drags (centre, edge, rim). 

      • Clave taps + drags (centre, edge, rim).

      • Metal brush taps, mutes + drags (centre, edge).

      • Paint brush drags.

      • Latex glove mutes.

      • Guitar pick drops.

      • Plastic stir stick taps.

      • Paper drops.

      • Teabag drops.

      • Linen cloth drops.

      • Plastic drops.

      • Cable whip hits.

      • Wooden spoons hits.

      • Cowbell hits.

      • Battery drops.

      • Tape roll drops.

      • Tape rips (skin).

      • Wet palm/skin hits.

      • Pen skin bends.

      • Metal plate drops.

      • Magnets drops.

      • Plastic mallet bends.

      • Ceramic mug warbles.

      • Cymbal hits.


      “If you want to do the conga, you've got to listen to the beat.”


      • 328 conga samples. (110MB)

      • 67 different conga articulations.

      • Up to 3 velocity layers per articulation.

      • Up to 6 random round robin samples per velocity layer.

      • 32 MIDI conga pattern loops. (.MID)

      • 1 Ableton 12 Suite demo song set with demo audio tracks. (215MB)

      • 1 Ableton 12 Suite Sampler Instrument. (.ADG)

      • 32 Macro variation sound presets.

      • 10 Instrument macro controls.

      • 96k/24bit .wav sources.

      • 100% Royalty-Free.

      • Designed in Vancouver, Canada by Subsocial Studios.


      Connect with us:

      _liquid loops SSS106




        _liquid loops includes over 340 drum & bass drum loops. Created exclusively in hardware, and inspired by the cleaner side of 2-step, this collection offers a ready to pour, undiluted collection of Liquid Drum & Bass inspired building blocks.


        Watch a loops demo/walkthrough and hear what's inside here:


        With 16x 4-bar drum patterns made from 16 different percussive palettes, and a whole bucket of pattern variations for each, you can mix and match, or layer and chop as you see fit to create a virtually limitless number of beat variations that work for drum & bass genres. 


        All loops were created at 174 bpm as a happy middle ground for tempo, while the patterns themselves are both different and similar enough to combine and arrange very fluidly. 


        Overall, the style is clean, simple, and ready to make dirty if you so desire. There are a few patterns that hit harder, or syncopate a little sideways, but they don’t stray too far from the overall unified, minimalist feel. This collection of loops can be used together, or as individual loops, which is why we think it’s extra “liquidy.”


        We used both old and new hardware samplers to create these loops with our own samples, and then captured them through an analogue chain consisting of saturation, EQ + compression. We think you’ll enjoy the results and where these loops will blend in your mixes.


        If architecture is frozen music then music must be liquid architecture.


        • 342 stereo drum loops. (990MB)

        • 96k/24bit .wav sources.

        • 100% Royalty-Free.

        • Designed in Vancouver, Canada by Subsocial Studios.


        Connect with us:

        bottom of page